Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can't use internet when anyconnect is connected?

I know I'm missing something very simple here, but when my anyconnect client is connected, I can't surf the internet. As soon as I disconnect, internet surfing is back to normal. I've looked through the ASDM and I can't find the setting to allow me to surf. What am I over looking?

Thanks,

Andy

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Can't use internet when anyconnect is connected?

Try using split tunneling:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080975e83.shtml

Unless you want all your internet connectivity to go over the VPN while connected, in which case you would have to use u-turning:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080972e4f.shtml

--Jason

2 REPLIES
Cisco Employee

Re: Can't use internet when anyconnect is connected?

Try using split tunneling:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080975e83.shtml

Unless you want all your internet connectivity to go over the VPN while connected, in which case you would have to use u-turning:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080972e4f.shtml

--Jason

New Member

Re: Can't use internet when anyconnect is connected?

Since the title is named appropriately for my problem I thought I would add-on rather than start another BLOG. Forgive me if I am wrong.

I want to connect to work (via anyconnect) and access the internet through work. I did look at the links that are listed but they do not apply to my situation. The VPN connection is to an ASA but the internet goes out a different firewall.

Before I make a VPN connection I have my local IP address (IP, mask and GW). When I make the VPN connection I get the IP from the ASA (IP, mask and GW) but my local IP address is modified (IP and mask - no GW). The problem is anyconnect on windows 7 PCs. On Win7, after I make the VPN connection I have my local IP address (IP, mask and GW) and my VPN IP address (IP, mask and GW). So I have two gateways. When I check the routes (route print) the local gateway is first and the VPN gateway is second. If I delete the local gateway (route delete) I am able to get connected to the Internet through the VPN tunnel through work. But then when I disconnect the VPN, then I do not have any gateway specified and I have to either re-add it (route add) or reboot the PC.

I have updated the anyconnect client to the latest but this has not resolved the issue.

2799
Views
0
Helpful
2
Replies