Cannot assign ip address from vpn concentrator 3020
I seem to be having a weird issue where I am able to assign an ip address from a local pool if it is part of a different subnet than the inside interface. But if I try to create a pool where i use a portion of the subnet that is on the same subnet as the inside interface it doesnt work.
So for example if the inside interface is 10.5.1.250
The local pool can be created as 10.5.2.1-254.
It works fine.
If the inside interface is 10.5.1.250
The local pool is 10.5.1.1-200
It doesn't work.
We already have a concentrator that has a similar setup that works fine and both of them are identically configured with the exception of a couple of Lan to Lan tunnels that are a bit different.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...