Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

certificates in router

Hi all,

I have a cisco 1811 router which has site to site vpn configured with 1 of my regional office. From the router config i can establish which are the phase 1 and phase2 configuration. However i see certificate info as below. How can i tell if the self sign certificate info below is being used by my router at all? Thks in advance.

crypto pki trustpoint test
enrollment selfsigned
subject-name cn=test2

revocation-check none
rsakeypair test
!
!
crypto pki certificate chain test
certificate self-signed 01
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  quit

2 REPLIES
Cisco Employee

Re: certificates in router

Hi Don,

Check to see where you have associated the trustpoint test, for example ike this

crypto isakmp profile l2lvpn
   ca trust-point test

New Member

Re: certificates in router

Hi Asimalik,

There is no association for the trustpoint test throughout the config from i what see including the IKE config under crypto isakmp.

Hence i believe the CA is not in use. Thks.

337
Views
0
Helpful
2
Replies
CreatePlease to create content