i have two branch offices A & B both connected by a vpn. i am planning to add another isp on both the locations and have it just for the vpn. i.e have the second isp do just vpn and all other traffic go through the older ISP.. what are my options ? am not planning to add any extra hardware and also am not planning on acheiving any fail-over or load-balancing because i know ASA 5510 does not do load-balancing.
After plugging in the new lines into each device, and setting up their IPs, create a static route to the new IP of the other device and use the gateway of the new line for that route. repeat in the opposite direction then setup the tunnel using the new IPs.
You do not create a default route using the new ip, only a route to the other vpn line.
1811 existing IP 220.127.116.11
1811 second (new) IP 18.104.22.168 - gateway 22.214.171.124
ASA existing IP 126.96.36.199
ASA new IP 188.8.131.52 - gateway 184.108.40.206 - nameif outside2
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...