03-12-2012 10:28 AM
Hi all,
i am seeking help with my configuration of Cisco 1841. I am new to cisco, so pls go easy on me.
I was able to configure the cisco to accept VPN connections from clients. But when i am connected i can not access the VPN LAN. My cisco VPN client shows all the time Packet Decrypted: 0 when connected. I tried the split tunneling configuration based on the example on cisco.com for split tunneling.
I include config for better understanding.
The outside interface is fa0/1 with ip 10.0.0.2 w LAN 10.0.0.0
Inside interface fa0/0 with ip 192.168.10.9 w LAN is 192.168.10.0
IP for VPN clients 192.168.20.100 - 105
I would really appriciate any help. I already tried some more nat rules and route adds but nothing really helped me.
Thank you
Petr
03-12-2012 10:47 AM
apply this config as you are missing nat.
ip access-list extended PAT_ACL
deny ip 192.168.10.0 0.0.0.255 192.168.20.0 0.0.0.255
permit ip 192.168.10.0 0.0.0.255 any
ip nat inside source list PAT_ACL interface FastEthernet0/1 overload
Let me know result.
thanks
Rizwan Rafeek
03-12-2012 05:23 PM
Thank you Rizwan for such a quick answer.
I added nat config to my router but the result is still the same. I can connect but after successful connection i can not ping nor connect to any remote PCs or other devices.
Still stays the same.
Petr
03-12-2012 06:46 PM
You might want to add tunnel source as well.
interface Virtual-Template1 type tunnel
tunnel source Loopback0
I also found a link, below about DVTI and you might want to refer it as well.
let me know.
thanks
03-12-2012 07:12 PM
Please read this thread, you will be able copy whole config from this thread, it is also radius base authentication. I actually tested for this client.
https://supportforums.cisco.com/message/3540503#3540503
thanks
03-21-2012 03:53 PM
Hi Rizwan,
took me a little while to get back to my configuration.
thank you for help with PAT settings, the main problem i had was that ip routing was disabled and also ip cef.
I enabled the ip routing and ip cef and VPN works fine now.
Petr
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: