Cisco 1841 VPN connect but no access to external LAN
i am seeking help with my configuration of Cisco 1841. I am new to cisco, so pls go easy on me.
I was able to configure the cisco to accept VPN connections from clients. But when i am connected i can not access the VPN LAN. My cisco VPN client shows all the time Packet Decrypted: 0 when connected. I tried the split tunneling configuration based on the example on cisco.com for split tunneling.
I include config for better understanding.
The outside interface is fa0/1 with ip 10.0.0.2 w LAN 10.0.0.0
Inside interface fa0/0 with ip 192.168.10.9 w LAN is 192.168.10.0
IP for VPN clients 192.168.20.100 - 105
I would really appriciate any help. I already tried some more nat rules and route adds but nothing really helped me.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...