Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco any connect loopback connection

We are facing a problem with our cisco anyconnect vpn. Our network setup is with a load balancer and a ASA. We configured our 2 ISP in load balancer and the nating is also through it.we had done a static nat with a public ip to ASA for site to site VPN and any connect VPN. From remote network we are able to connect to anyconnect. But now we have a requirement that , we need to seperate the laptop users to isolated VLAN and they need to connect through VPN for our internal resource. We create a seperate interface in ASA ..but we are not able to connect to cisco anyconnect Vpn because we are tryng to connect through same internet ip which vpn configured. I request any one to suggest the configuration to achieve the connection..we are not doing nat in ASA only route to loadbalancer interface. Do I need any ACL for this or any loopback route..plz suggest
  • VPN
84
Views
0
Helpful
0
Replies
This widget could not be displayed.