Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Anyconnect reconnecting

Hello

We have a customer that gets this message after 5 - 10 seconds after he has connected through Cisco AnyConnect VPN Client Version 2.5.3055.

Error: "A VPN reconnect resulted in different configuration setting. The VPN network setting is being re-initialized. Applications utilizing the private network may need to be restored."

Error log :

Function: CMainThread::WaitWhileProc

essingEven

ts

File: .\MainThread.cpp

Line: 7119

Invoked Function: CMainThread::ProcessEvents

Return Code: -32636919 (0xFE0E0009)

Description: MAINTHREAD_ERROR_UNEXPECTE

D

--------------------------

--

Reconfigure reason code 5:

Reconnecting due to an IP forwarding table modification.

--------------------------

--

Automatic correction of the routing table has failed. Notifying higher levels of the routing change notification for possible further corrective action.

--------------------------

--

Function: CRouteMgr::tableCallbackHa

ndler

File: .\RouteMgr.cpp

Line: 1779

Invoked Function: CChangeRouteTable::VerifyR

outeTable

Return Code: -33095661 (0xFE070013)

Description: ROUTETABLE_ERROR_INTERFACE

_NOT_FOUND

--------------------------

--

Function: fileExists

File: .\Utility\sysutils.cpp

Line: 500

Invoked Function: _tstat

Return Code: 2 (0x00000002)

Description: Systemet finner ikke angitt fil.

File: C:\ProgramData\Cisco\Cisco

AnyConnect VPN Client\InitialFirewallConf

ig.wfw

Error: No such file or directory

--------------------------

--

Message type warning sent to the user:

A VPN reconnect resulted in different configuration settings. The VPN network interface is being re-initialized. Applications utilizing the private network may need to be restarted.

We have tried to change the mtu too 1200, but that didnt help.

1.Open a command line window as an Administrator (ie. right click on All Programs > Accessories > Command Prompt and select Run as administrator) ...

2.Type the command netsh and wait for prompt

3.Type the command interface and wait for prompt

4.Type the command ipv4 and wait for prompt

5.Type the command set subinterface "Local Area Connection" mtu=xxxx store=persistent

OS : Windows 7 x64

Cisco AnyConnect client 2.5.3055

Does anybody have any idea whats causing this?

  • VPN
3121
Views
0
Helpful
0
Replies