Hello
We have a customer that gets this message after 5 - 10 seconds after he has connected through Cisco AnyConnect VPN Client Version 2.5.3055.
Error: "A VPN reconnect resulted in different configuration setting. The VPN network setting is being re-initialized. Applications utilizing the private network may need to be restored."
Error log :
Function: CMainThread::WaitWhileProc
essingEven
ts
File: .\MainThread.cpp
Line: 7119
Invoked Function: CMainThread::ProcessEvents
Return Code: -32636919 (0xFE0E0009)
Description: MAINTHREAD_ERROR_UNEXPECTE
D
--------------------------
--
Reconfigure reason code 5:
Reconnecting due to an IP forwarding table modification.
--------------------------
--
Automatic correction of the routing table has failed. Notifying higher levels of the routing change notification for possible further corrective action.
--------------------------
--
Function: CRouteMgr::tableCallbackHa
ndler
File: .\RouteMgr.cpp
Line: 1779
Invoked Function: CChangeRouteTable::VerifyR
outeTable
Return Code: -33095661 (0xFE070013)
Description: ROUTETABLE_ERROR_INTERFACE
_NOT_FOUND
--------------------------
--
Function: fileExists
File: .\Utility\sysutils.cpp
Line: 500
Invoked Function: _tstat
Return Code: 2 (0x00000002)
Description: Systemet finner ikke angitt fil.
File: C:\ProgramData\Cisco\Cisco
AnyConnect VPN Client\InitialFirewallConf
ig.wfw
Error: No such file or directory
--------------------------
--
Message type warning sent to the user:
A VPN reconnect resulted in different configuration settings. The VPN network interface is being re-initialized. Applications utilizing the private network may need to be restarted.
We have tried to change the mtu too 1200, but that didnt help.
1.Open a command line window as an Administrator (ie. right click on All Programs > Accessories > Command Prompt and select Run as administrator) ...
2.Type the command netsh and wait for prompt
3.Type the command interface and wait for prompt
4.Type the command ipv4 and wait for prompt
5.Type the command set subinterface "Local Area Connection" mtu=xxxx store=persistent
OS : Windows 7 x64
Cisco AnyConnect client 2.5.3055
Does anybody have any idea whats causing this?
