Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CISCO Anyconnect SSLVPN client accessing Windows file shares

Hi all,

I'm evaluating the Anyconnect client to replace our IPSec Client in the near future.  When I use the Anyconnect client I can connect to email, but I cannot get to file share resources.  If I IPSec to the same profile, everything works.  Am I missing some sort of configuration to allow the file share access to work?

Thanks,

Bill

Everyone's tags (1)
3 REPLIES

Re: CISCO Anyconnect SSLVPN client accessing Windows file shares

As a first step, you will want to make sure that you have correctly configured WINS and DNS servers for the AnyConnect tunnel group.

New Member

Re: CISCO Anyconnect SSLVPN client accessing Windows file shares

From dos prompt when connected can you see if you can telnet to the servers local ip address on tcp port 445 (used for windows file sharing)

New Member

A quick tip is to check your

A quick tip is to check your local antivirus or software firewall on the PC you are trying to connect to.

Disable if for testing.

1391
Views
0
Helpful
3
Replies
CreatePlease to create content