Cisco Anyconnect VPN Issue

[mudassar.khan]

Hello All,

I would appreciate if someone can guide me to resolve the following issue.

I am setting up anyconnet vpn server on the ASA firewall for one of my client. VPN client is a virtual server at remote site. Server can dial in and access resources remotely but as soon as it hook into the VPN local pc are unable to communicate and access resources on that server.

Please can someone reply asap.

Regards,

Mud                  

[Marvin Rhoads]

The profile assigned on the ASA most likely does not allow split tunneling and instead routes ALL traffic through the tunnel. That effectively cuts off the client from all local resources.

There is a Cisco configuration example here that explains in some more detail. It's a bit dated but the concepts are the same even with the latest software.