I have setup a Cisco ASA to allow VPN using a client. I have one user who is on a Mac who doesn't get dropped at all and uses the connection every night. I have another user on Windows who gets dropped every 5 minutes. The Windows users is using the VPN Client 5.x to connect to the ASA which is what we are using to connect to our older 3000 concentrator. Can this client absolutely not work with this ASA or should I be using the AnyConnect?
I am checking with the Mac user to see what he uses for a client.
We have an ASA 5505 and I successfully connect to it with cisco client 5.x. I had a user that was getting disconnected on some days and then yesterday he stayed connected all day just fine. I think the problems we are experiencing are with our isp.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...