Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ASA AnyConnect iPad Connection

Hi,

I'm trying to get AnyConnect setup so that iPad's can connect to access network resources.

I'm receiving the following error on the iPad when I attempt to connect: AnyConnect is not enabled on the VPN Server.

Here's the configuration:

webvpn

enable outside

anyconnect-essentials

svc enable

tunnel-group-list enable

group-policy SSL-VPN internal

group-policy SSL-VPN attributes

vpn-tunnel-protocol webvpn

split-tunnel-policy tunnelall

webvpn

  svc keep-installer installed

  svc rekey time 30

  svc rekey method ssl

  svc ask none default svc

tunnel-group SSL-VPN type remote-access

tunnel-group SSL-VPN general-attributes

address-pool SSL-VPN-USERS

authentication-server-group LONDON-GLOBAL-DC

default-group-policy SSL-VPN

tunnel-group SSL-VPN webvpn-attributes

group-alias SSL-VPN enable

And an ip local pool has been created.

Any suggestions?

Regards,

Jake

Everyone's tags (4)
2 REPLIES
New Member

Cisco ASA AnyConnect iPad Connection

I am having the same issue.  I have installed the AnyConnect mobile license and all works fine when I have authentication pointed to the local ASA database, but when I change it to RADIUS I get the Anyconnect VPN client not enabled on the VPN server.

I am guessing that this is a bug and may have been resolved in newer code.  The ASA I am working with is running 8.0(3)6 code.  I have never had this issue on an ASA running 8.2 code.

New Member

Cisco ASA AnyConnect iPad Connection

The ASA pair I've tried this on is running 8.2. This is pointed at LDAP but I know that's working.

1223
Views
0
Helpful
2
Replies