We are trying to build up a VPN connection with a supplier of ours using the subnet 172.16.1.0/24 now they already have an other customer using 172.16.1.0/24 so we have to NAT the traffic to a different subnet before connecting to the supplier. Is this possible? If so how can I configure something like that?
172.16.1.0/24 is also used to get to the internet.
This is what I have at the moment:
access-list internet_cryptomap_2 extended permit ip 192.168.0.0 255.255.252.0 (supplier subnet)
crypto map internet_map1 3 match address internet_cryptomap_2
crypto map internet_map1 3 set peer (supplier IP address)
crypto map internet_map1 3 set transform-set tubis-transformset
crypto map internet_map1 3 set reverse-route
This VPN is working, but only for the subnet listed in the cryptomap_2 unfortunatly I can't use 172.16.1.0/24 for this.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...