Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco asa vpn configuration

Hello,

I have a cisco asa 5505
with following configuration :

inside 172.17.7.4

outside public fixed ip (dhcp)

Interal range 172.17.4.0/24
VPN Range 10.232.0.200 - 10.232.0.205 used with Cisco vpn client

3 Site2SiteVPN Tunels (Ikev1/IPSec AES256 SHA1) on outside interface

172.17.4.0/24 <-> 172.16.0.X / 172.18.0.X
172.17.4.3 <-> 10.233.0.10
172.17.4.0/24 <-> 192.168.23.0/24

.2.50

If I test my client vpn connection i'm able to access 172.17.4.0/24 but i would like to connect to 172.16.0.X and 172.18.0.X network ...
What would be the best practice to configure
this without changing a lot to the Tunnel configurations at 172.16.0.X / 172.18.0.X side.

thanks for your advice :)


Kind Regards

Everyone's tags (4)
1 REPLY
New Member

If you want to make it simple

If you want to make it simple, you can configure static routes on the VPN server to let you access these two networks when the VPN is successfully connected.

Hope this could help.

84
Views
0
Helpful
1
Replies