We would need some more information to complete this:
Can you confirm Phase 2 is not completing, or it's completing but packets aren't traversing? This can usually be determined by a 'show crypto ipsec sa'.
Can you get the output from a 'debug crypto isakmp 127' and 'debug crypto ipsec 127' while VPN negotiation is occurring? (this will generate a lot of logs, so make sure you have a good screen buffer set)
In theory if phase 2 is negotiated but there is some routing/nat issue, then we would see an IPSEC SA but no encaps/decaps. On the other hand, if Phase 2 is not negotiating at all, we should be able to see that in the ipsec/isakmp debugs.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...