I'm currently setting up an IPSec VPN from an ASA at head office to an 1800 ISR at a site office.
So far, PC connectivity is not a problem, however I want to implement CM phones at the site as well.
In head office, the phones are on a 192.168.25.0 network, while the PCs are on a 192.168.24.0 network. Routes and ACLs are in place so traffic can flow to both networks from the remote site.
The network at site I have established is a 10.1.0.0/24 network, so PCs and devices at the remote site get 10.1.0.0 addresses.
Effectively what I want is to have the phones plug in at the remote site and stay on the 192.168.25.0 network (their native network), while still running over the IPSec tunnel. Is this possible? If not, what would be the best course of action?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...