Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Secure v3.3 Cert/PEAP Issues

I am running into an issue trying to deploy PEAP on a CACS v3.3 box; I followed the steps to configure and install the certificate issued by the enterprise CA and everything up to that point seems to work without issue; but, as soon as I try and enable PEAP and "Allow EAP-MSCHAPv2" and click submit ACS returns "Failed to initialize PEAP or EAP-TLS authentication protocol because ACS certificate is not installed.". Any help would be greatly appreciated.

1 REPLY
New Member

Re: Cisco Secure v3.3 Cert/PEAP Issues

Check whether the following steps have done on your side regarding the certificates

Install the root CA certificate for the Server

Install Server Certificate on the Server - testserver.pfx

Setup ACS to use the Server Certificate

130
Views
0
Helpful
1
Replies
CreatePlease login to create content