Cisco VPN 3000 Certificate , is it compatible with ASA5500
We would like to export SSL Cert from VPN 3000 and import it to ASA5540. However we are receiving the error ""import pkcs12 operation failed" is it possible to overcome this issue ? Or the formats of VPN3000 and ASA is incompatible ? I though the SSL Certificate is in a standard format ?
Copy these to two separate files, one named cert.txt and one named key.txt and then follow the instructions below.
========================================================================= Copy your key and cert into two separate files (key.txt and cert.txt). Make sure these files are accessible from OpenSSL. From there, do the following two commands:
1. Combine the key and cert into a pkcs12 (this uses "cisco" as a password for both). -passin must be the password used when exporting the VPN3k cert.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...