I have configured an ISR to allow Cisco VPN Client access, using the local database for extended authentication. My customer wants now to allocate always the same IP address (from the pool addresses) to each user, is it possible, and how is it configurable ?
You can do by configure it in ACS. If the address pool is for the remote vpn client users then make sure that they get the IP's in the same range as the internal network they want to access. Following links may help you
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...