Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CISCO Vpn Client and Remote MPLS Networks

Hi

My client has a cisco pix 515e with IOS 7.2 on.

They have a multiple subnets connected via mpls behind the pix.

We need to let the vpn clients access these remote networks but i am not sure where to start.

Can someone please point me in the right direction

Thanks

John

1 REPLY
New Member

Re: CISCO Vpn Client and Remote MPLS Networks

The Internet Security Association and Key Management Protocol (ISAKMP) User Datagram Protocol (UDP) ports 500 and 4500 must be enabled on the outside interface of PIX. Also check for the access list configuration. Refer URL

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml

130
Views
0
Helpful
1
Replies