Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco VPN Client connected, but no secured routes.

Hello,

I can connect to a VPN server smoothly, but after connecting I am not able to reach any local resources. When I looked at the VPN Client stats, it shows only one route in "Route details--> secured routes", 1.1.1.1 255.255.255.255. This is the reason I cannot access any resource. What could be causing this issue? How can I make the secured routes advertise to cisco client? I dont have access to the server, but I will ask the person who can make changes to it.

Thank you.

Regards,

Shivani

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Cisco VPN Client connected, but no secured routes.

Shivani,

Split tunneling is what you're looking for, it will affect your secured routes.

Marcin

Cisco Employee

Re: Cisco VPN Client connected, but no secured routes.

Hi Shivani,

What you see under "secured routes" on the VPN client is the traffic that is allowed to go through the tunnel. Split tunneling is used in order to configure this.

You need to configure the split tunnel acl under the group policy (if its a asa) on the headend. So when the client connects to the asa, the settings configured under the group policy get pushed to the client.

Please refer to the document below for more information on how to configure split tunneling if your headend is a cisco ASA:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml#s2

Please refer to the document below for more information on how to configure split tunneling if your headend is a cisco router.

http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml

Let me know if this answers your query.

Regards,

Manisha Mandekar

4 REPLIES
Cisco Employee

Re: Cisco VPN Client connected, but no secured routes.

Shivani,

Split tunneling is what you're looking for, it will affect your secured routes.

Marcin

New Member

Re: Cisco VPN Client connected, but no secured routes.

Marcin,

I think I framed my question wrong way. I am not looking to access local resources where the client is, but I need to and not able to access resources on the corporate network, where VPN server resides. I should see subnets under "secured routes" which indicates traffic to those subnets will be encrypted and those subnets can be accssed over the tunnel. But I dont have any subnets under secured routes. It just has 1.1.1.1 255.255.255.255.

Thank you.

Shivani

Cisco Employee

Re: Cisco VPN Client connected, but no secured routes.

Hi Shivani,

What you see under "secured routes" on the VPN client is the traffic that is allowed to go through the tunnel. Split tunneling is used in order to configure this.

You need to configure the split tunnel acl under the group policy (if its a asa) on the headend. So when the client connects to the asa, the settings configured under the group policy get pushed to the client.

Please refer to the document below for more information on how to configure split tunneling if your headend is a cisco ASA:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml#s2

Please refer to the document below for more information on how to configure split tunneling if your headend is a cisco router.

http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml

Let me know if this answers your query.

Regards,

Manisha Mandekar

New Member

Re: Cisco VPN Client connected, but no secured routes.

Thanks Manisha!!

6832
Views
0
Helpful
4
Replies
CreatePlease to create content