Cisco VPN Client Error 429

[aryarahul]

Hi,

I am trying to connect to VPN using cisco VPN client , i have entered ip address and port no in the hostname with username and password but when i try to connect it immediately gives the error "secure VPN connection terminated by client , Error 429 : unable to resolve host"

Thanks

[Marius Gunnerud]

From where are you connecting to the VPN (internet or inside network)?

i have entered ip address and port no in the hostname with username and password

I am not sure what you mean with this.  Could you elaborate on this, and perhaps provide a screenshot of what you enter to connect to the VPN.

Has this VPN worked before, or is this a new setup?

Could you provide a full running config of your ASA please, remember to change all public IPs and passwords.

--
Please remember to rate and select a correct answer

[aryarahul]

Hi,

Thanks for the reply , sc attached below for reference

actually i have configured https port as 8004 and DTLS port as 443

this is a new setup

with the same setup and port anyconnect works fine but cisco vpn client is not working

[Marius Gunnerud]

We would need to see your configuration to get a better idea of what is going on.

--
Please remember to rate and select a correct answer

[Javier Portuguez]

Hi Rahul,

Are you connecting by IP or name?

If you connect by name, can you trying to ping the name and test if it works?

Have you tried including the harcoded port to the name when connecting?

BTW, what is the AnyConnect version?

HTH.

[aryarahul]

Anyconnect version is 2.5.0217 , it works in that

but with Cisco VPN Client 5.0.0.7

Cisco VPN Client is not able to connect     & i am connecting by IP not by hostname

Thanks

[Javier Portuguez]

Rahul,

So you are using the Cisco VPN client client version 5.0.0.7.

To begin with, that version is too old.

On the other hand, are you sure the user is entering the right IP address and not adding any ","?

The only reason I could think of, is that somehow your entering a name instead of a valid IP format and such name cannot be resolved.

Please double check and let me know.

HTH.

[Marius Gunnerud]

Are you using Windows 8 by any chance?

--
Please remember to rate and select a correct answer

[Javier Portuguez]

Just to add more details:

The Cisco VPN client is not supported on Windows 8.