Re: Cisco VPN Client Sateful Firewall and Exchange
Check if following is configured. Under the Configuration | User Management | Base Group | Client FW Parameters Tab choose
'Firewall Required', then select Cisco Integrated Client Firewall. You would then specify the filter you want to use for the client. This uses the Policy Pushed(CPP)feature. Following link may help you
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...