When I connect from an ADSL connection using the Cisco VPN client everything works fine, when I use my mobile phones bluetooth connection and the VPN client everything works fine...but when I use the PCMCIA UMTS/GPRS card to connect to the Internet and then combine it with the Cisco VPN client everything works fine except mails larger than 30K, they make problems and do not pass (I get a server taking to long to respond and other errors in the Ethereal output).
Does anyone have any idea what could be the problem here.
P.S: When I use the PCMCIA UMTS/GPRS card and Outlook to send e-mails (no Cisco VPN client in this case), everything works fine.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...