Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

Citrix Receiver Proxy


Im trying to configure the Citrix Mobile Receiver Proxy on a ASA but cant get it to work.

The ASA got several VPN configured, both client, clientless vpn and L2L.

It looks like ASA are terminating SSL every time the iPad connects.

What could be missing here? And any good advice on how to troubleshoot appreciated.

ASA 5585  -  OS 9.1(8)

Citrix Receiver  - 5.8.3

Citrix config:

group-policy DfltGrpPolicy attributes

dns-server value x.x.x.30 x.x.x.31

vpn-simultaneous-logins 10

vpn-tunnel-protocol ikev1 l2tp-ipsec

default-domain value xxx .org


  customization value DfltCustomization

  vdi type citrix url domain username CSCO_WEBVPN_USERNAME password CSCO_WEBVPN_PASSWORD

From Log Viewer:

Citrix VDI.png

Everyone's tags (4)
Community Member

Re: Citrix Receiver Proxy

I did some captures today and all I got is the outside capture with a RST,ACK back to my test client.

On the inside interface, going to the Citrix server nothing. Did check for both ASA inside IP and the Citrix server IP in diffrent ways (any->ASA, Citrix->any, etc)

Looks like ASA is not listening for, or understands, incomming Citrix traffic?


Just saw this:  Key size >1024 is not supported as of now.

All certificates on the ASA are 2048, probably the problem?


Community Member

Hi,I have the exact same


I have the exact same problem here and after doing some heavy WebVPN Citrix and aaa common debugging on the ASA, I can see that the authentication goes just fine through and ASA considers the connection to be accepted, but after that the connection is just dropped like said here earlier.


Have you found any solution to this one. 

CreatePlease to create content