Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

client can't ping RTC's loopback0,RTC is behind dmz

vpnclient4.0 to pix525 OSv6.3

RTC have route to dmz,but no route to vpn pool,because vpn pool is private to outside.

do i need use fake pool for nat here?

another question,what is the relationship between the vpnpool ip and the inside,outside or dmz ip

thanks for u respond

2 REPLIES

Re: client can't ping RTC's loopback0,RTC is behind dmz

hi

Its better to use a seperate pool of ip block for the vpn pool instead mingling the same with the other security zones..

regds

New Member

Re: client can't ping RTC's loopback0,RTC is behind dmz

Providing vpn pool is different from the other security zone use , the client still need access the other security zone through nat, not just nat0.

eg.RTC which have not route to vpn pool,while client

need access the pc1 through NAT.

vpnclient---pix---RTC---pc1

148
Views
0
Helpful
2
Replies