Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Client VPN fails with ISAKMP errors

Hi,

situation:

cisco 878 configured to accept client vpn requests. From client prospective people get error 412 and they can't connect. Not sure what s wrong, following configuration and debug isakmp. Autentication is through a radius server.

thanks in advance.

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Client VPN fails with ISAKMP errors

In the config above - you have wrong crypto map assigned to interface.

Also, I'd suggest using VTI based setup and not crypto maps.

3 REPLIES
Cisco Employee

Client VPN fails with ISAKMP errors

In the config above - you have wrong crypto map assigned to interface.

Also, I'd suggest using VTI based setup and not crypto maps.

Community Member

Re: Client VPN fails with ISAKMP errors

Hi,

thanks for the tip

I have changed

crypto map VPNTOMEL 1 ipsec-isakmp

--More--                            description VPN to Perth

set peer $$$$4

set transform-set ESP-3DES-SHA

set pfs group2

match address 118

to (so it has the same name as the group vpn).

crypto map RDAPER 2 ipsec-isakmp

description VPN to Perth

set peer $$$$4

set transform-set ESP-3DES-SHA

set pfs group2

match address 118

changed the crypto map in the dialer interface to crypto map RDAPER

The IPSEC vpn went back up, but i m still getting the same errors connecting using the vpn client

any clues?

thanks

Community Member

Re: Client VPN fails with ISAKMP errors

Hi,

i ve marked the answer as correct so you can get some rep back. Thanks for putting me in the right direction.

That was one problem the other problem that the crypto map was missing:

crypto map RDAPER 10 ipsec-isakmp dynamic dynmap

thanks

Nick

567
Views
0
Helpful
3
Replies
CreatePlease to create content