Clients reach company network but internet connection drops
I think I have some quite basic problem and I am just missing something stupid. Now I was wondering if you were able to help me.
I have a PATed network with one external IP address. Clients receive IP addresses and can access network ressources just fine. However, their internet connection drops.
I tried enabling split tunneling and it appears to work (the protected network shows up in the vpn client in statistics) and users are still able to access network resources. But still, no internet connection.
I have then checked with route print which is the default route. I found out, that it looks like the VPN client adds a default route to its network and therefore routes all traffic there.
I have removed that route in Windows and it appears the internet connection is restored, that would be ok like that.
Now I was wondering what I need to change in the router configuration so that this route won't get created at all - any ideas?
I posted my configuration below, some ip addresses and other not so important parts were blanked out.
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network sdm_vpn_group_ml_1 local
DocumentationCode download linksGoalRequirementLimitationsSupported ISR
and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and
UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity
options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in
HA DocumentationCode download linksGoalRequirementLimitationsSupported
ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and
UCS-E Blades:Step by Step ConfigurationCo...
Question I am currently unable to specify "crypto keyring" command when
configuring VPN connection on my cisco 2901 router. The following
licenses have been activated on my router :