I was wondering if there is any compatibility issue if an ASA5510 firewall is configured as an EZVPN server and a 877adsl router configured as a ezvpn remote.. i have configured it and find only software clients can connect. but the 877hardware client connot. any inputs?
Verify your ISAKMP configuration. Once you configure both devices, the Cisco 877 router attempts to setup the VPN tunnel by contacting ASA automatically using the peer IP address. After the initial ISAKMP parameters are exchanged, the router displays this message:
Pending XAuth Request, Please enter the
following command: crypto ipsec client ezvpn xauth
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...