Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Concentrator 3005 L2L Filters

Anyone have a step by step on creating rules->filters->applying to and IPsec L2L tunnel in the 3005 concentrator. I created rules, trying to assign rules to filters and SA to the rules in that filter and recieve the following error.

"SA is part of an IPSec LAN-to-LAN connection,and cannot be added to a rule."

What am I suppose to do? I added the filter to the user group L2L.

Any info would be great. I read through the Cisco Configuration Reference guide but this isn't making sense.

3 REPLIES
Silver

Re: Concentrator 3005 L2L Filters

you simply need to reapply the L2L settings and Reboot after making changes to fliter on external interface .

New Member

Re: Concentrator 3005 L2L Filters

So I just modify the 2 rules on the external interface (Default) filter and add whatever else i want? Reboot the concentrator to make the changes go into effect?

Reboot is going to be harsh.

Re: Concentrator 3005 L2L Filters

Have a look at this example that's goes through the motion of creating rules, applying the rules to the filter and SA setup etc.

http://www.cisco.com/warp/public/471/ALTIGA_pix.html

HTH

Sundar

112
Views
0
Helpful
3
Replies
CreatePlease to create content