Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Concurrent connection on VPN 3000

Hi guys,

I need help on one VPN problem i have. i have VPN 3000 and cisco ACS 4.0. can you tell me or direct me to a documentation on configuring only one connection (session) for per username/password. if thesame username/password pair is used while a session exist, access should be denied.

3 REPLIES

Re: Concurrent connection on VPN 3000

Hi,

You can set the max or minimum simultaneous login for each user in a group, for all groups or for individual user ID in VPN: By default is 3 simultaneous login.

Base Group : same setup for all groups -> Configuration | User Management | Base Group | General Tab

Specific Group only : Configuration | User Management | Group | General Tab

Specific Username/ID : Configuration | User Management | Users | Add or Modify | General Tab

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_guide_chapter09186a00803ee1f0.html#wp1756983

If you want to set it to one (1) session only, change the value to '1'. This will limit the access to one session for each user. Any attempt to connect using the same username will fail if the 1st session is still active.

Rgds,

AK

New Member

Re: Concurrent connection on VPN 3000

Hi,

Just referring to the question back then regarding simultaneous logins for VPN concentrator.

The docs specified that the default is 3 simultaneous logins for 'Single Internal Users'.

I have configured a User Group that utilises RADIUS as a authentication method. Can i utilise the 'Simultaneous Login' as well ?

Please assist. Thanks!

Regards,

Sam

Re: Concurrent connection on VPN 3000

Sam,

Which radius you are using ? It is possible with ACS.

Regards,

JG

PLease rate if that helps

145
Views
0
Helpful
3
Replies
CreatePlease login to create content