Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Conduit to ACL tool

Hi,

i am looking for converting conduit to ACL tool..

pls help me out in this regard..

Regards

sateesh

8 REPLIES

Re: Conduit to ACL tool

sateesh,

AFAIK - there is no tool to convert from conduit to acl. What version are you currently running - and what version are you upgrading to?

New Member

Re: Conduit to ACL tool

Hi,

In the same PIX i have conduit and ACL also.. Now i want to convert all conduit to ACL...

Regards

sateesh

Re: Conduit to ACL tool

There is not tool - you will have to do it manually.

HTH>

Re: Conduit to ACL tool

Ignor my last post - there is a way:-

at:-

http://www.cisco.com/en/US/docs/security/asa/migration/guide/pix2asa.html#wp284407

I found this:-

Converting the conduit and outbound Commands

The recommended method for converting conduit and outbound commands is to use the OCC tool. However, the OCC tool is only supported on Windows and Solaris. To convert conduit and outbound commands on Linux or Macintosh, you must use the online Output Interpreter tool. See https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl.

HTH>

New Member

Re: Conduit to ACL tool

Hi,

Thanks for info..

I have tried thru output intrepretter ..But sh conduit command is not supporting..

But i have to try with OCC

Regards

sateesh

Re: Conduit to ACL tool

Sateesh,

If you paste the output from a "show run" into the output interpretter - it should highlight and suggest the conduit<>acl conversion.

HTH>

New Member

Re: Conduit to ACL tool

Hi,

I gettign the following error..

WRITE TERMINAL - APPLY/CONDUIT/OUTBOUND TO ACCESS-LIST CONVERSION

TOOL NOTIFICATIONS (if any)

Please find the converted PIX Access-list statements from conduit, outbound or apply

statements.

NOTE: Thoroughly review the converted access-list statements and verify that the

conversion matches security policies.

Unrecognized character  at /opt/httpd/root/apps/output/bin/converter.bin line

1.

Regards

sateesh

Re: Conduit to ACL tool

Can you post the conduit config please?

210
Views
0
Helpful
8
Replies
CreatePlease login to create content