Configuration of SSL VPN under Cisco Security Device Manager version 2.5 with Cisco 2821 Router
We use the Cisco Device Manager to generate the certificate enrollment (csr) and applied the SSL certificate with a CA.Then we receive 2 certificates, one is CA and another one is for the router. We import the certificate into the router through security device manager and it was successful. (Certificate enrollment.jpg) . But in the router certificate windows, it shows that the certificate is unsupported in SDM. When we go back to SSL VPN Screen, it prompts that a self signed certificate is required. After we configured the self-signed certificates, we launch the configure of SSL VPN wizardand it prompts again that a self signed certificate is required.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...