I need to configure a cisco pix 515e as vpn concentrator. Now the network has 2 cisco pix in failover - May I add a new cisco pix in parallel and redirect the vpn tunnel on it? How do I need to make the configuration in order to work?
I don't have Visio.. Anyway, the new pix is parallel to the existent two.. at least, I think it has to be configured so..
Here's an example: lan network: 1.1.1.x - public network_ 2.2.2.x... There are 2 pix 515 in failover with an inside and outside.. Now I want to add a third pix with the same private and public network.. How can I redirect the vpn traffic to this last one pix?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...