Configure VPN between PIX 506e & ASA 5505 with dynamic IP
I have a Cisco PIX 506e with a static IP at our main location. This unit has hosted multiple VPN tunnels for some time without issue. Recently we replaced a failed PIX unit at a remote office location with an new ASA 5505. This remote site has had a dynamic IP address for some time and connected the VPN without issue. However, I cannot get the ASA 5505 to connect the VPN tunnel. I have initiated a new VPN tunnel on the main PIX - matched config settings but still cannot get VPN to connect.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...