In our office we have set up the Cisco WRV210 router with VPN Client access to allow remote access for users.
I am testing the client from a Windows Vista machine running the Cisco Small Business QuickVPN Client ver. 184.108.40.206. When connecting I select "Use Remote DNS Server".
I can verify IP connectivity and I see the DNS server list (ipconfig) gets updated based on the remote network. However, the DNS suffix search list now contains the entry "linksys", presumably set by the WRV210.
How can I change this (on the WRV210) to be something useful, like the DNS suffix of my office network?
This would be very helpful in getting DNS queries to operate properly from the VPN client in my configuration.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...