Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connecting to ASA5540 using ASDM

I just got my ASA5540 and working on configuring it. So far I have configured the IP and able to telent to it but some reason I can use ASDM to connect to. Is there a special feature that I have to enable to connect using ASDM?

Please let me know. Thanks for your help.

1 REPLY
Gold

Re: Connecting to ASA5540 using ASDM

you need enable the HTTPS server and let a host on the inside interface access ASDM,

enter the following commands (for example let host with an address of 192.168.1.2 access to ASDM) :

ASA(config)# crypto key generate rsa modulus 1024

ASA(config)# http server enable

ASA(config)# http 192.168.1.2 255.255.255.255 inside

ASA(config)# write mem

M.

Hope that helps rate if it does

218
Views
0
Helpful
1
Replies
CreatePlease login to create content