Re: Controlling time of Remote Access VPN connection
Yes, you can configure a maximum connect time.
Configuring the Maximum Connect Time
Specify the maximum user connection time in minutes, or enter none to allow unlimited connection time and prevent inheriting a value for this attribute. At the end of this period of time, the adaptive security appliance terminates the connection.
The range is 1 through 35791394 minutes. There is no default timeout. To allow an unlimited timeout period, and thus prevent inheriting a timeout value, enter the vpn-session-timeout command with the none keyword. To remove the attribute from the running configuration, enter the no form of this command.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...