Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Convert remote access vpn to split-tunnel help please...

Hello I have a regular remote access VPN set up on our ASA 5505 and need to convert it to a split-tunnel so we can continue to access out local lan resources while being on the VPN.  Any help would be greatly appreciated!

I attached our current config.

1 REPLY
Cisco Employee

Re: Convert remote access vpn to split-tunnel help please...

Hi,

You might find the below link helpful:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml#s2

Only modification you will need is to specify your local network (192.168.10./24) in the access-list in place of 10.0.1.0/24 in the above document.

I have linked the CLI specifically. You can find the steps to do the same using ASDM as well in the above document.

All the best!!

Thanks and Regards,

Prapanch

196
Views
0
Helpful
1
Replies
CreatePlease to create content