Convert remote access vpn to split-tunnel help please...

[bchyka]

Hello I have a regular remote access VPN set up on our ASA 5505 and need to convert it to a split-tunnel so we can continue to access out local lan resources while being on the VPN.  Any help would be greatly appreciated!

I attached our current config.

[praprama]

Hi,

You might find the below link helpful:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml#s2

Only modification you will need is to specify your local network (192.168.10./24) in the access-list in place of 10.0.1.0/24 in the above document.

I have linked the CLI specifically. You can find the steps to do the same using ASDM as well in the above document.

All the best!!

Thanks and Regards,

Prapanch