Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Creating mulitple site-to-site VPNs on Cisco router.

Hi,

 

We have a requirement where we need to create multiple site-to-site VPN on Cisco routers running IOS 15.1, having 2 different source interfaces, i.e VPN1 using Loopback1 and VPN2 using Loopback2

 

How can we achieve this ? We have a limitation of defining the below command

 

crypto map ABC local-address Loopback1 <-- we cannot define Loopback2 here.

 

Thanks for the help.

1 REPLY
Hall of Fame Super Silver

Perhaps we had a better

Perhaps we had a better understanding of what you are trying to achieve we might give better advice. But based on what you have given us so far I would suggest this as a solution that would work

crypto map ABC local-address loopback1

crypto map DEF local-address loopback2

or if you really need to have just a single crypto map then my suggestion is to use the crypto map and to not configure the local-address. Then IOS will use the address of the interface through which it exits as the address for the traffic.

 

HTH

 

Rick

15
Views
0
Helpful
1
Replies