Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

creating static route help

I can't seem to create a static route based on following criteria.  Can anyone help?  ASA 5505 and VPN tunnel is in play:

Interesting Traffic = your single host is trying to talk to our side.

Will need to create a static, 1:1 policy NAT of interesting traffic to host 10.1.12.164

Will need to make an IPSec ACL from host 10.1.12.164 to 192.168.50.0/24
Will need to make an IPSec ACL from host 10.1.12.164 to 10.10.3.0/24

 

Can anyone tell me the commands to do this? Start of my config:

 

interface Vlan1
 nameif inside
 security-level 100
 ip address 192.168.1.1 255.255.255.0
!             
interface Vlan2
 nameif outside

 

Thank you,

Derek

Everyone's tags (1)
55
Views
0
Helpful
0
Replies
CreatePlease to create content