cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
81425
Views
10
Helpful
1
Replies

%CRYPTO-6-IKMP_MODE_FAILURE: Processing of Informational mode failed with p

Ahmede
Level 1
Level 1

Should we worry about this mesaage.. We have GRE/IPSEC tunnel between two sites.. First site has 3700 and the second 1700..

%CRYPTO-6-IKMP_MODE_FAILURE: Processing of Informational mode failed with peer

1 Reply 1

spremkumar
Level 9
Level 9

Hi Ahmed

As pe rthe supporting doc its mainly because of the negotiations failure between the peers.

You need to check out the IKE and IPSEC parameters on both the peers and make sure you have the same parameters/keys defined..

%CRYPTO-6-IKMP_MODE_FAILURE: Processing of [chars] mode failed with peer at [IP_address]

Negotiation with the remote peer has failed.

Recommended Action: If this situation persists, contact the remote peer.

Also you can refer these links for more info on the same..

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094353.shtml

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800949c5.shtml

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008023ce5b.shtml

http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_release_note09186a00800c48d6.html

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00801d55aa.shtml

regds

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: