Different L2L VPN's having same Phase 1 ID's but Different Peer ID's
I am running L2L VPN's on a Cisco ASR 1006 Router and the remote side of the VPN is a variation of ADSL and/or LTE Connections using non-Cisco hardware. When we create the VPN Tunnels, it seems as if there is a possibility that there could be instances where the VPN would be created using the same Phase 1 ID but have unique Peer ID's. This is mainly due to the hardware being used on the ADSL/LTE side. Has anyone on here had a similar situation and will the L2L VPN's function normally as the Peer ID does not get routed at all
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...