DMVPN-Qos pre-classify on Tunnel vs transport mode
I wanted to know if applying qos pre-classify command behaves differently in DMVPN IPsec Tunnel mode than for Transport mode. All the TOS bits should be copied by IPSec from the inner IP header to the outer header, right ? If anybody had come across documents which explain this, please share it with me.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...