Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

DNS and AD Issues

We are in the process of replacing a PIX with a 2821 running the VPN feature set. When we put in place and terminte a VPN tunnel to the PIX at the far end, then connection and tunnels appears to come up fine, but we seem to be having some issues with DNS and/or AD. The PC on the remote networks can ping the central Domain contollers, but when they go to logon, they can logon onto the network, but are unable to run the logon script wihich maps drive, printers and applies the security policy. Anyone see this before or have any ideas

2 REPLIES
Bronze

Re: DNS and AD Issues

Are you getting any error messages?

Hall of Fame Super Silver

Re: DNS and AD Issues

Is it possible that in the process of making changes something was done that prevents PMTUD (Path MTU Discovery) from working. This could produce a problem with packets that are large, require fragmentation, but can not be fragmented. I have seen this happen when someone decided to deny ICMP (including the ICMP error fragmentation required but DF set which is essential to PMTUD).

You might try configuring ip tcp adjust-mss on the 2821 and setting the segment size to a fairly low value (I have had good success with 1370) and see what happens.

HTH

Rick

126
Views
0
Helpful
2
Replies
CreatePlease to create content