when i create a vpn peer in my PIX or ASA, will the host gets resolved to ip address from the public DNS or it will just translates once & maintains the same ip address?
bcoz my requirement will b like this, vpn.cisco.com is what i would like to keep as a remote peer, so i would not b using any static ip address, i would be using a dynamic public ip address, so when ever if ip address is getting changed this vpn.cisco.com should act according to the new ip address.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...