Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Does AnyConnect 2.4 VPN Client work with a PIX506?

Does AnyConnect 2.4 VPN Client work with a PIX506?  If not, what client can I use with a Windows 7 64bit OS?

3 REPLIES

Re: Does AnyConnect 2.4 VPN Client work with a PIX506?

Fuller,   annyconnect does not work with any  PIX as far as I know,   your solution to using Annyconnect client in Windows 7 64 bit is to upgrade your PIX506 with at least ASA5505 which is its upgrade path, then you can think of Annyconnect client implemenation  for 64 bit platforms.

Here is ASA specs  if you upgrade

http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html

Lastly you can also reference this link posted  by Nelson on Q&A of Annyconnect

https://supportforums.cisco.com/docs/DOC-1361

New Member

Re: Does AnyConnect 2.4 VPN Client work with a PIX506?

HI,

If replacing the PIX is not you option go for L2TP over IPSEC or PPTP.

Even the Windows 7(64 bit) native VPN client would work with it.

the link to setit up L2TP over IPSec is as follows:

www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807213a7.shtml

the link to setup PPTP is:

www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

Regards,

Pradhuman

New Member

Re: Does AnyConnect 2.4 VPN Client work with a PIX506?

shrew.net......open source vpn client that suppots Windows 7 x64 AND pcf file import........

994
Views
0
Helpful
3
Replies