I'm trying to enter following command but CSR is not accepting it: "crypto ipsec client". Initially it didn't accept even "cypto ipsec" until I enabled premium level (by executing "license boot level premium"; advanced level should work too).
I tried to google this issue but only useful link was broken; it mentioned something about EzVPN supporting server side only (see attach).
I believe you are trying to enter command "crypto isakmp client configuration group xxxx" and instead of this you are entering "crypto ipsec client .... ". There is no such command on the router for EZVPN.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...